| filter: | +blade +ceiling +finish +steel +inch +knife +diamond +length +fanimation +snap +fans +duty +features +high +bronze +edge +hunter |
| tags: | blade bronze ceiling diamond duty edge fanimation fans features finish high hunter inch knife length snap steel |
|
$62.50 |
Separating Blade Tile Shaper Ring Saw Taurus 3 Blades Separating Blade For internal cuts, omni-directional. The separating blade is the same size as the Standard blade and has exactly the same cutting action. The difference is that the Separating Blade is made from a stainless steel wire that is coated with the same high quality process as all our blades and then has a coupling attached to it which is also coated for protection and smooth action. This blade gives you the ability to open the blade, slide it through, reattach and make internal cuts with no entry point. All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard [...].  |
|
$57.99 |
This is a Fein 6-35-02-144-01-4 3 1/8 HSS Flush Cut Saw Blade. This Blade is designed to cut harder material and last longer. High speed steel blade for cutting wood fiberglass and steel up to 16 gage flush with the surface. The smaller size can cut in tight spots where other blades cant. The blade has a depressed center to cut squarely against flat surfaces. These blades cut by oscillation only a few teeth do the cutting. |
|
$62.99 |
Gemini Taurus 3 Tile Shaper T3 Original Blade Original replacement part for the Gemini Tile Shaper & Taurus 2 & Taurus 3 Taurus 3 Blades 1) All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials. All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn. Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an opt [...]. |
|
$69.99 |
TX-30 offers a thicker kerf version of MK Diamond’s popular Hot Dog blade. The unique “J” cooling slots deliver fast “chip free” cutting of porcelain tile and other hard dense materialsTX Blade Series have a 1" arbor that differentiates them from typical wet cutting tile blades available in the market. The TX Blade Series are premium blades that match the high quality standards that professionals expect. Please note: standard 5/8" Arbor Tile Blades will NOT Fit the TX-3 tile saw. |
|
$69.60 |
The Milwaukee 48-00-8713 9-Inch 10 TPI Super Sawzall Torch Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. The blade will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$25.99 |
Choose from four different cutting blades for use with the MultiMaster tool (#22183).Flush cut blade has a depressed center so you can cut squarely against flat surfaces.E-Cut Universal blade is for cutting metal up to 2.0mm, wood, plaster cardboard and synthetic materials.E-Cut Standard blades in 1-3/8 and 2-1/2 widths are ideal for sawing of sparings and cuts into lightweight partition walls, constructional timber elements and furniture, trimming of door jambs to match higher flooring, and more. |
|
$21.99 |
Choose from four different cutting blades for use with the MultiMaster tool (#22183).Flush cut blade has a depressed center so you can cut squarely against flat surfaces.E-Cut Universal blade is for cutting metal up to 2.0mm, wood, plaster cardboard and synthetic materials.E-Cut Standard blades in 1-3/8 and 2-1/2 widths are ideal for sawing of sparings and cuts into lightweight partition walls, constructional timber elements and furniture, trimming of door jambs to match higher flooring, and more. |
|
$84.99 |
Choose from four different cutting blades for use with the MultiMaster tool (#22183).Flush cut blade has a depressed center so you can cut squarely against flat surfaces.E-Cut Universal blade is for cutting metal up to 2.0mm, wood, plaster cardboard and synthetic materials.E-Cut Standard blades in 1-3/8 and 2-1/2 widths are ideal for sawing of sparings and cuts into lightweight partition walls, constructional timber elements and furniture, trimming of door jambs to match higher flooring, and more. |
|
$63.99 |
This is a Fein 6-35-02-127-02-0 Precision E-Cut Saw Blade - 2 1/2 3 pack. The flush-cut design of E-Cut blades let you place the blades flat on surfaces perpendicular to the cut. E-Cut Blades increase the cutting speed on the MultiMaster. Cut almost as fast as a jigsaw or reciprocating saw with precision. |
|
$50.00 |
Buy a 10 Pearl Specialist blade and save Pearl 10 DTL10HPXL was $54.99 now only $50.00 Pearl 10 DTL10HPXL Porcelain Blade Super high performance blades for cutting hard tile & porcelain. Tile Cutting Technology Smooth Thin Kerf for Chip-Free Cutting High Strength Core Eliminates Wobble and Wrapage Special Bond Design for Hard Porcelain 8mm High Rim, .060 Rim Width 10 diameter, 5-8 arbor. Laser Cut Cooling Holes Dissipate Heat for Extended Blade Life Optimal Blade Thickness for Speed Accuracy of cut Outperforms Other Premium Porcelain Blades Extra Hard Tile, Ceramic Tile, Natural Stone, Granite, Hard Tile, Hard Ceramics, Porcelain. Aggressive diamond ma [...]. |
|
$29.99 |
-E-Cut Blades are perfect for making cuts in tight places. Fein E-Cut blades cut wood plastic plaster board and even metal. Fein has several tooth patterns for smooth or aggressive cuts and most blades are available in two widths. The flush-cut design of E-Cut blades let you place the blades flat on surfaces perpendicular to the cut. E-Cut Blades increase the cutting speed on the MultiMaster. |
|
$63.60 |
The Milwaukee 48-00-8788 9-Inch 18 TPI Super Sawzall Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. The torch blades will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$20.99 |
The Milwaukee 48-00-5789 12-Inch 18 TPI Super Sawzall Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. These Torch blades will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$13.99 |
The Milwaukee 48-00-5784 6-Inch 18 TPI Super Sawzall Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. These Torch blades will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$3099.00 |
Husqvarna K960 Concrete Ring Saw Free shipping from factory warehouse Available February 16 Replacement for the K950 14 Diamond concrete Ring Blades ELR20 14 Ring blade for working in hard to very hard concrete ELR45 14 Ring Blade Medium-hard blade with a wide range of applications 14 ELR70 14 Ring Blade Hard blade for cutting soft building material 14 SLR45 14 Ring Blade Moderately hard blade with a wide range of applications K950 concrete Ring Saw is Suitable for Deep concrete cutting Gas water sewer maintenance Demolition work Indoor Refurbishment work K950 Ring Saw General Info Husqvarna has created the first 14 gas powered saw with a 10 cutting de [...]. |
|
$34.99 |
The DeWalt DW3106P5 is a 10-Inch carbide saw blade combo pack. The package includes one DW3106 10-Inch 60-tooth carbide blade and one of the DW3103 32-tooth cabide blade . These thin kerf blades provide fast and smooth cutting action with minimal material waste. The exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy. Ideal for cutting applications in softwood hardwood chipboard and plywood using miter saws and slide miter saws. Both blades feature a 5/8-inch arbor. |
|
$26.99 |
The DeWalt DW9158 is a 6-1/2 18 teeth and 24 teeth Circular Saw Blade Combo Pack. This pack has DW9155 & DW9154 blades. All blades are designed for cutting different works like cutting aluminum extrusions brass copper and other non-ferrous metals and general purpose wood cutting in framing lumber plywood and wood composites. |
|
$14.99 |
Felker FV-C Diamond Blades Continuous rim dry cutting blades for ceramic tile. Fast cutting speed with smooth cuts Minimal to zero chipping 7/8 - 5/8 or 20 mm arbor. 10pcs bulk available, 4 Only $10.99 each. |
|
$119.00 |
Barranca MK-70 4 Wet Tile Cutter w 2 Blades & Case Free water hose attachment, 4 MK-304CR continuous rim diamond blade, 4 turbo rim diamond blade, & plastic case. 11,800 RPM, weight 7 lbs. 20mm (3/4 ) arbor. Suitable for cutting tile, brick, block, concrete, stucco and fiber cement siding Ergonomically designed grip. Adjustable base permits varying both cutting depth and cutting angle Easy to use trigger switch with safety interlock Includes water hose attachment for wet cutting Includes 4 continuous rim and turbo rim diamond blades Convenient storage case included. Makes bevel cuts from 0 to 45 degrees. |
|
$16.99 |
This pack of three Milwaukee 48-39-0561 44-7/8-Inch 14/18 TPI Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum angle iron bronze brass copper galvanized pipe mild steel and tougher steels including stainless chrome tungsten steel plus other problem material at slow speed. Features: 14/18 TPI Bi-Metal Construction Matrix II high speed steel teeth with 8% cobalt For cutting stock 5/32-Inch to 5/16-Inch thick F [...]. |
|
$16.99 |
This three pack of Milwaukee 48-39-0551 44-7/8-Inch 10/14 TPI Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum angle iron bronze brass copper galvanized pipe mild steel and tougher steels including stainless chrome tungsten steel plus other problem material at slow speed. Features: 10/14 TPI Bi-Metal Construction Matrix II high speed steel teeth with 8% cobalt For cutting stock 3/16-Inch to 1/2-Inch thick Fo [...]. |
|
$39.00 |
The DeWalt DW4702 is a 7 Continuous Rim Industrial Dry wet Diamond Blade. The blade lasts 100 times longer than abrasive blades and cuts faster and easier with less power requirements. It provides straight constant depth of cut and eliminates multiple blade changing. It is extremely useful in cutting concrete reinforced concrete stone granite brick and tile. |
|
$675.00 |
MK-100 Tile Wet Saw Kit Features Entry level professional quality saw Free 10 MK diamond blade, stand, water pump, rip guide, dressing stone, adjustable protractor, & dual angle guide MK-100 Wet Saw General Information Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings Two position motor post cutting head for convenient cutting of various tile sizes Built-in water distribution system supplies water to both sides of blade Variable height cutting head allows for plunge cutting and use of blades smaller that 10 diameter Blade guard accommodates 6 and 8 profile wheels Micro V-belt drive Linear-Bearing and chrome plated guide-bar assembly [...]. |
|
$13.00 |
Diamond blade dressing stone Rubi Volcano resin dressing stone will unleash the best cutting ability of all your diamond products, such as blades, hole saws, etc. Designed to sharpen and reactivate diamond blades, as they may have been glazed over by cutting super hard porcelain. |
|
$121.99 |
10 Metalgres Wet Saw Blade for Cutting Glazed Tiles Metallic looking tile that has glazed metal on the surface, metalgres is the ultimate blade for cutting this tile. Introducing Alpha Metalgres blade, designed to cut metallic tile with ease. Unlike any other tile blades on the market, Metalgres cuts metallic tile clean and fast without clogging. Once again, Alpha® leads the way in providing the best solutions for today’s market. Wet cutting only, Max Rpm 5900, 5/8 arbor. |
|
$14.99 |
Innovative, high-quality High Speed Steel jig saw blades have unified shanks with Bi-Metal Unique? technology to reduce breakage. Blade design and cutting stroke produces dual chips that are more easily removed from the cut. Blades fit most jig saws. |
|
$12.99 |
Innovative, high-quality High Speed Steel jig saw blades have unified shanks with Bi-Metal Unique? technology to reduce breakage. Blade design and cutting stroke produces dual chips that are more easily removed from the cut. Blades fit most jig saws. |
|
$45.99 |
-MK Diamond ceramic stone and glass blades blend superlative quality performance and value. These blades are manufactured to exact tolerances to ensure precise cutting clean-cut edges and long service life. They can cut through any type of ceramic tile and stone with minimum chippage. These blades are made to retain their cutting edge so that theyll consistently deliver high performance at a low cost. |
|
$17.99 |
The Grip 46071 is a 100 Piece Hook Blade Dispenser. The heat treated steel blades that fit all types of utility knifes. Hook blade is ideal for cutting flooring such as linoleum and carpet. This dispenser provides safe storage while keeping blades readily available for use. |
|
$719.00 |
Free shipping from MK factory warehouse Free 7 diamond blade, rip guide, & submersible water pump Made in the USA Rip cuts 14 tile. Diagonally cuts 10 x 10 Ultra-quiet 3/4 HP direct drive DC motor with blade braking system Variable height cutting head allows for plunge cutting and use of blades smaller than 7 in diameter. |
