| filter: | +inch +volt +speed +cordless +battery +router +reconditioned +factory +heel +heels +drill |
| tags: | battery cordless drill factory heel heels inch reconditioned router speed volt |
|
$169.99 |
The Makita DA4000LRR Factory Reconditioned 1/2-inch Angle Drill has a quick switch drill head for low or high speed use. The Makita DA4000LRR has a powerful 7.5 AMP motor for improved performance. Ergonomically designed rubberized grip makes the Makita DA400LRR the ideal choice for a day of work. Ball bearing construction keeps the Makita DA400LRR going for long tool life and smooth operation.  |
|
$49.99 |
The Makita BML185 is a 18V LXT Lithium-ion Rechargeable Flashlight - Tool Only. The high illumination flashlight emits high power at 4500 Lux. The Makita BML185 has a Xenon bulb for extra brightness. It runs up to 4.3 hours per charge. |
|
$249.99 |
The Makita MAC700 is a 2 HP Hot Dog Air Compressor. The MAC700 features a super quiet motor that draws only 12.4 Amps to operate. The exclusive finned discharge tubing of the Makita Air Compressor increases heat dissipation that reduces moisture in the lines and the easily removable cast iron cylinder reduces wear and increases pump life. The heavy-duty roll cage construction provides extra protection against the harsh jobsite environments. The high quality Makita air compressor provides maximum performance. |
|
$99.99 |
The Makita BJR181ZR is a 18-Volt Cordless LXT Lithium-Ion Bare Reciprocating Saw. The Makita BJR181Z has a compact design at only 19-5/8-Inch length and weighing only 8.1 lbs for less operator fatigue. The ergonomic shape of the Makita BJR181Z fits like a glove with even pressure and easy control. LXT Lithium-Ion (sold separately) provides longer run time 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). The Makita BJR181Z has a 45-minute optimum charger (sold separately) and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the [...]. |
|
$159.55 |
The Makita GA7911 is a Heavy-Duty 7-9-Inch Angle Grinder. The Makita GA7911 has an extra heavy-duty motor for high production and continuous use6000 RPM for optimum material removal. The Makita Angle Grinder accepts 7 inch or 9-Inch wheel with correct guards. The Angle Grinder has a removable side handle which can be mounted on either sideAC/DC switch for use with alternative power source. |
|
$389.99 |
The Makita BJV180 is a 18-Volt LXT Lithium-Ion Cordless Jig Saw Kit. It has 4-Pole position cut settings (3 Orbital and 1 Straight) for fast and efficient cutting in all applications. The Makita BJV180s large variable speed trigger allows for total cutting control (0-2600 SPM). LXT Lithium-Ion provides longer run time 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). The 25-minute rapid optimum charger on the Makita BJV180 communicates with the battery throughout the charging process using the built inch chip in the battery and built inch CPU chip in the charger. This chip helps to actively cont [...]. |
|
$329.55 |
The Makita BCS550 is an 18-Volt LXT Lithium-Ion Cordless 5-3/8 Inch Metal Cutting Saw Kit. TheMakita BCS550s high torque motor produces 3400 RPM for faster metal cutting. The saw cuts Unistrut all thread channel corrugated conduit pipe sheet metal square tubing steel and more. The Makita BCS550 features an ergonomic shape that fits like a glove with even pressure and easy control. The Makita BCS550s LXT lithium-Ion provides longer run time 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). The Rapid optimum charger and battery of the Makita BCS550 communicates throughout the charging process usin [...]. |
|
$149.55 |
The Makita BSS501Z is a 18-Volt Cordless 5-3/8-Inch Circular Trim Saw - Tool Only. The Makita BSS501Z has ergonomically designed handle with soft grip which provides better fit and even more control. The blade wrench on the Makita BSS501Z stows away in the saw for fast and convenient blade changing. LXT Lithium-Ion provides longer run time 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). The Makita BSS501Z 25-minute rapid optimum charger communicates with the battery throughout the charging process using the built inch chip in the battery and built inch CPU chip in the charger. It actively cont [...]. |
|
$44.99 |
The Makita 711494-A 1/4-inch to 1-1/8-inch High Speed Steel Step Drill Bit drills perfectly round holes in materials such as steel brass plastic and wood. The Makita 711494-A is ideal for knockouts in electrical junction boxes and cabinets. An efficient way to enlarge and debur holes the Maktita 711494-A steps in increments 1/4-inch 7/8-inch and 1-1/8-inch . |
|
$449.77 |
The Makita BPB180 is an 18-Volt Cordless LXT Lithium-Ion Portable Band Saw Kit. The Makita BPB180 has a compact design at only 20-5/8 inch length and weighs only 14.1 lbs for less operator fatigue. The ergonomic shape of the Makita BPB180 fits like a glove with even pressure and easy control. LXT Lithium-Ion provides longer run time 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). 45-minute optimum charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The Makita BPB180s Charger also uses Active 3 Control for [...]. |
|
$209.99 |
The Makita BJR181R Factory Reconditioned BJR181 18-Volt Cordless LXT Lithium-Ion Reciprocating Saw is a poweful yet lightweight cordless recip saw that offers optimal mobility without an electrical cord to get in the way. Features: Durable Makita built D35 high torque motor delivers 50% faster cutting with a 1-1/8-Inch stroke length that cuts at 2 900 SPM Compact lightweight design measures only 19-5/8-Inches in length and weighs only 8.1-Pounds offering better control and less operator fatigue Comfortable ergonomic shape fits like a glove with even pressure and easy control What's In The Box: Makita BJR181R 18-Volt Cordless LXT Lithium-Ion Recipro [...]. |
|
$26.99 |
The Makita 711493-A 1/4-inch to 3/4-inch High Speed Steel Step Drill Bit drills perfectly round holes in materials such as steel brass plastic and wood. The Makita 711493-A is ideal for knockouts in electrical junction boxes and cabinets. An efficient way to enlarge and debur holes the Maktita 711493-A steps in increments 1/4-inch 5/16-inch 3/8-inch 7/16-inch 1/2-inch 9/16-inch 5/8-inch 11/16-inch and 3/4-inch. |
|
$20.99 |
The Makita 711492-A 1/8-inch to 1/2-inch High Speed Steel Step Drill Bit drills perfectly round holes in materials such as steel brass plastic and wood. The Makita 711492-A is ideal for knockouts in electrical junction boxes and cabinets. An efficient way to enlarge and debur holes the Maktita 711492-A steps in increments 1/8-inch 5/32-inch 3/16-inch 7/32-inch 1/4-inch 9/32-inch 5/16-inch 11/32-inch 3/8-inch 13/32-inch 7/16-inch 15/32-inch and 1/2-inch. |
|
$54.99 |
Alpha High Speed PVA 10pcs High Speed: PVA Makita Style, max Rpm 12,000. No backer pad needed. Polish bullnose, shaped edge and carved detail without damaging the workpiece. It is the perfect way to polish marble or travertine 10 per box. Dry polishing system used to polish marble edges and is ideal for baseboard, corner and countertop edge applications. Excellent for job site touch-ups. Fast working and long lasting, PVA Makita® Style is easy to use and works well on most common high-speed grinders. Use on the edges of ceramics, woods and metals or paint removal as the material will not clog. Marble shops will find PVA Makita® Style very effective o [...]. |
|
$389.55 |
The Makita LXT406 is an 18-Volt LXT Lithium-Ion Cordless 4-Piece Combo Kit. This kit includes a 1/2-Inch Hammer Driver-Drill a 6-1/2-Inch Circular Saw a Reciprocating Saw and a Flashlight. All of these LXT Lithium Ion tools come with two 3.0Ah 18-Volt Batteries and a 30-Minute Rapid Charger in a Contractor Bag. Features: 1/2-inch Hammer Driver-Drill has a new 4-pole motor for 450 inch-pounds of torque and weighs only 3.9 pounds 6-1/2-inch Circular Saw has a D35 high-torque motor that delivers maximum power for cutting 2 times the material at 45 degrees and is only 6.9 pounds Reciprocating Saw with tool-less blade changes and shoe adjustments at only 8. [...]. |
|
$179.55 |
The Makita TW0350 is a 3.5 Amp 1/2-Inch Square Drive Impact Wrench. Features: Impact resistant aluminum gear case with rubber boot protects the all metal gears and offers increased durability 0 - 2 000 impacts per minute for maximum efficiency High max torque (260 ft.lbs.) for demanding applications Efficient impact system with less vibration and longer tool life What's In The Box: Makita TW0350 3.5 Amp 1/2-Inch Square Drive Impact Wrench Belt Clip (324284-9) Plastic Carrying Case (824630-1). |
|
$36.95 |
Makita 793186-4 6-3/4-Inch Planer Blade Set High Speed SteelFor use with Model 1806B. |
|
$3769.99 |
G12010R Makita Generator 12,000W High Output Capacity for Demanding Situations G12010R Makita Generator Features: Feature OSHA approved receptables Commercial-duty steel gas tank All ball bearing supported, forged steel crankshaft Cast-in-place cylinder liner made from high carbon steel Water resistant louvers (IP235 rating) to protect the electrical components Bubber feet mounts to reduce vibration 8+ hours of operation from a full fuel tank Electronic voltage regulator for more accurate voltage output Fuel gauge for easy monitoring GFCI safety receptacle & USDA approved spark arresting muffler Dual voltage - 120V/240V output Electric starter with aut [...]. |
|
$349.99 |
The Makita BTW251 is a Lithium-Ion 18-Volt Cordless Impact Wrench Kit. It features 4-pole maximum torque motor which delivers 170 ft-lbs of efficient torque in a compact size. It has ergonomic shape which fits like a glove with even pressure and easy control. The BTW251's Lithium-Ion battery provides longer run time 5x lower self-discharge (for use any time) & 16 firm holding contact terminals (for constant high power). The Makita BTW251's rapid optimum charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The BTW251's charger also uses Active 3 Control [...]. |
|
$39.99 |
The Makita 9553NBK is a Factory Reconditioned 4-Inch Angle Grinder. It has protective zigzag varnish which seals motor from contaminants by forming a barrier under rotation. The labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels. The 6.0-amp motor design provides high output power in a more compact tool. |
|
$199.55 |
Makita DA3010F 3/8 inch angle drill provides a durable high output with LED light which will illuminates the drilling area with a bulb that never needs replacement. The drill is lightweight (3.1 lbs) and compact with a reduced head height of 2-5/8 inch. It is perfect for cramped working spaces. The powerful 4.0 Amp motor is an aggressive performer. The drill has a variable speed range between 0-2400 RPM for controlled drilling in wood metal and speed fastening. The paddle switch has a speed-limiting dial to prevent over tightening the fasteners. The ball bearing construction ensures long tool life and smooth operation. |
|
$379.99 |
Makita 194093-8 is adjustable portable table saw stand with Wheels which is made from high quality tubeless steel and comes fully assembled except for the base plate which can be easily attached using the two nuts and bolts supplied. There are five height settings (260mm – 630mm) including the transportation mode which effectively turns the stand into a sack barrow for easy transportation. The stand and saw can then be stored on its end using the flat base for limited storage environments. The height of the stand can be easily adjusted thanks to the gas rams weight assistance mechanism while the leveling feet ensure perfect all round ground contact [...]. |
|
$159.60 |
The Makita BDA350Z is a 3/8-inch 18V LXT Lithium-Ion Cordless Angle Drill - Bare Tool (battery and charger are NOT included). This 3/8-inch 18V Cordless Angle Drill from Makita has a high power 4-pole motor for excellent drilling performance. This variable speed drill is reversible for driving and removing screws. The compact design and reduced head height is great for working in tight spaces. The built-in L.E.D light illuminates your work area and stays lit for 12-13 seconds after trigger release. The ergonomical and lightweight design makes this an excellent choice for longer projects. Powered by the latest Lithium-Ion battery technology (not include [...]. |
|
$196.00 |
PV7001C Makita 7 Electronic Polisher High Power-to-Weight Ratio Lightweight for Easy Control (4.4 lbs.) Electronic Speed Control Maintains Speed Under Load Motor over pad design for better balance and maximum control Variable Speed For Desired Application Externally accessible carbon brushes for easy maintenance Removable handle for left or right hand use Variable Speed (2,500 - 4,700 RPM) for Desired Application Well Balanced For Maximum Control And Reduced Operator Fatigue Soft Start Feature Gradually Brings Tool to Speed. Amps 7.9, (120V) 5/8-11 spindle thread. |
|
$189.99 |
The Makita 4131 is a factory reconditioned 7-1/4 inch Metal Cutting Saw. It has a maximum cutting depth of 2-1/2 inch and a higher chip retention efficiency than other competitors models. It is equipped with the Ceramic-Metal blade for incredibly fast and clean cuts each and every time. |
|
$89.99 |
The Makita HP2050F is a Factory Reconditioned 3/4 inch Hammer Drill with L.E.D. Light. It features a built-in shock-proof high output white L.E.D. light which illuminates drilling edge and increases visibility with a bulb that never needs replacing throughout the life of the tool. A trusty positive stop locks into either mode which avoids slipping out of gear. The drill also features a large trigger switch and 360º swivel side handle for added comfort and adaptability. It has ergonomic and well balanced design with rubberized grip for comfort and control reducing operator fatigue. The air vent holes supply required ventilation while protecting motor [...]. |
|
$49.55 |
The Makita 6825 is a Factory Reconditioned Variable Speed Reversible Drywall Screwdriver. The Rocket operates between 0-6000 RPM 50% faster than most screwguns which max out at 4000 RPM. The new screwgun features a 6.5 Amp motor with plenty of torque. Sealed ball-bearing construction ensures that the gun runs smoothly at higher speeds without harm from drywall dust. The tools larger trigger also incorporates a sealed switch that protects it from dust. |
|
$1549.99 |
This 18-Volt LXT Lithium-Ion 15-Piece Combo Kit from Makita includes a 1/2-Inch Hammer Driver-Drill 6-1/2 Inch Circular Saw Reciprocating Saw LXT Impact Driver 7/8-Inch SDS-Plus Rotary Hammer 4-1/2 Inch Cut-Off Angle Grinder 3/8-Inch Angle Drill Drywall Screwdriver 1/2-Inch Impact Wrench 1/2-Inch High Torque Impact Wrench 5-3/8 Inch Metal Cutting Saw Cordless Blower Rechargeable Flashlight Rechargeable Flourescent Incandescent Flashlight and a Job Site Radio. These tools employ Lithium-Ion Technology an optimum re-charging system that produces a greater total battery lifetime with 2.5x more cycles. Lithium-Ion batteries also provide longer tool run tim [...]. |
|
$79.99 |
Makita 9554NB 4-1/2 Angle Grinder Switch is located on top of motor housing. Small circumference barrel grip for easy handling. Labyrinth construction seals motor and bearings. Spindle lock for easy wheel changes. Double insulated. Included 4-1/2 grinding wheel. 5 Amps, 11,0000 Rpm. Weight 3.1 lbs. Exclusive labyrinth construction that seals the motor and bearings from contamination. The 9554NB features a switch that is conveniently located on the top of the motor housing; a small circumference barrel grip for easy handling, a high power-to-weight ratio and a double insulated motor. A spindle lock makes for easy wheel changes and the side handle can be [...]. |
|
$199.99 |
This table-fence-plate package features our new tabletop, redesigned to ramp-up performance! Durable high-pressure laminate sandwiches a 1-1/8 thick MDF core for a flat and stable 24 x 32 work surface. And with a built-in aluminum miter track and an 10-point plate leveling locking system, setup and operation are a breeze. The aluminum fence features two adjustable melamine-coated MDF faces, front and top accessory T-tracks and an integrated bit guard, while a new, larger 8-1/4 x 11-3/4 x 1/4 precision-machined aluminum plate provides sag-free support. Group A Routers (#26221):Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-1618; Rigid 2930 [...]. |
