| filter: | +blade +board +length +sleeve +total +waist +wash +size +bust +materials +bamboo +color +black +blades |
| tags: | bamboo black blade blades board bust color length materials size sleeve total waist wash |
|
$11.25 |
1/4 shank. Two flute.  |
|
$55.64 |
Second piece is cut upside-down to the first for a perfect fit. There is no need to realign the router depth provided that the wood is centered to the cutting edge of the bit. Can be used on 5/8 through 1 material 1/2 shank. Two flute. |
|
$849.99 |
The MK Diamond MK-100 10-inch Wet Cutting Tile Saw features a powerful 115V 1-1/2 hp GE motor for dependability. It also features a shaft lock for safe easy blade changes. The MK-100 tile saw is built in the MK Tradition featuring durable lightweight construction while delivering professional results. This tile saw has a cutting depth capacity of 3-1/4 inches and will rip cut a full 18-inch tile while diagonally cutting a 12-inch tile. Two position cutting head for greater versatility in cutting various tile sizes. Chrome-plated linear guide-bar system ensures precision alignment & accurate cutting. Cast-aluminum blade guard with built-in water distrib [...]. |
|
$289.55 |
The Makita 4101RH 5-inch Wet Cutting Masonry Saw is ideal for wet cutting masonry stone or concrete. The special cover design prevents water from entering into motor housing. The Makita 4101RH has a Ground fault circuit interrupter (GFCI) plug for added safety when using water to wet cut. Features: Cuts up to 1-3/8-inch at 90 degrees and 13/16-inch at 45 degrees Lock-on button for continuous use operation Powerful 7.9 AMP motor Adjustable depth of cut What's In The Box: Makita 4101RH 5-inch Wet Cutting Masonry Saw Water Pressure Regulator 15 feet of Tubing Diamond Wheel Hex Wrench Water Valve Wrench. |
|
$119.55 |
The Makita 4100NHX1 is a 4-3/8-Inch Masonry Saw with 4-Inch Diamond Blades. It has Makita built motor which delivers 12 Amps for various cutting applications. The saw has increased 1-3/8-Inch cutting capacity. It features more compact design at only 8-5/8-Inch long and weighs only 5.9 lbs for less operator fatigue. Its lock-off button helps prevent accidental starts. |
|
$189.99 |
The Makita 4131 is a factory reconditioned 7-1/4 inch Metal Cutting Saw. It has a maximum cutting depth of 2-1/2 inch and a higher chip retention efficiency than other competitors models. It is equipped with the Ceramic-Metal blade for incredibly fast and clean cuts each and every time. |
|
$99.99 |
. |
|
$19.99 |
The DeWalt DW9152 is a 6-1/2 inch 36 Teeth Aluminum Cutting Circular Saw Blade. It is an ultra-thin kerf blade for fast cutting. The non-ferrous blade is for use with 6-1/2 inch saws. |
|
$49.99 |
Tenryu IA-18560D 7-1/4-inch 60 Tooth Non-Ferrous Metal-Cutting Saw Blade has resin-filled laser cut slots to reduce cutting noise and reduce vibrationMarket-leading thin-kerf design to reduce cutting waste and improve sharp-lifeTriple Chip Grind (TCG) - Center of kerf is cut first then flat-top raker removes chips and widens the cut; leads to longer blade life in hard materials. |
|
$116.60 |
The DeWalt DW7747 14-Inch Ferrous Metal Cutting Saw Blade is durable and long-lasting capable of making an average of 1 200 cuts in most materials. The DW7747 blade is also designed so that you can easily resharpen the blade's teeth for better cutting and a longer life. |
|
$99.55 |
The DeWalt DW7737 is a 12-Inch 60 Teeth heavy gauge ferrous metal cutting saw blade. It has 12% titanium carbide which provides long life in metal cutting. The modified ATB tooth geometry provides clean burr-free cuts. Tri-foil braze absorbs stress making the tip stronger. The heavy gauge blade is used for ferrous metal cutting. |
|
$599.99 |
The Wilton 3130 5-inch x 8-inch Dry Metal Cutting Horizontal Bandsaw 1/2HP 1PH horizontal bandsaw comes with an adjustable hydraulic feed system and adjustable ball bearing guides. There is a heat treated steel worm gear and bronze drive gear and comes with convenient handle and wheels to move to various work stations. |
|
$999.99 |
The Wilton 3400 7-inch x 12-inch Dry Metal Cutting Horizontal Band Saw 3/4HP 1PH is the ideal product for a machine maintenance and fabricating shop or for limited run machine production work. The Wilton 3400 has adjustable ball bearing blade guides and an djustable hydraulic feed system. The Wilton 3400 also comes with a wheel kit so you are able to move it around the shop easily. |
|
$79.99 |
The DeWalt DW304PKR Factory Reconditioned DW304PK Reciprocating Saw is the best choice for flush cutting capability increased versatility and less bending of blades. A powerful 10 Amp motor and a 1-1/8-inch blade stroke capacity enables cutting through thicker stock. Features: 4-position blade clamp allows for flush cutting and two vertical and two horizontal cutting orientations Powerful 10.0-amp motor designed for heavy-duty applications Lever-action keyless blade-changing system for quick and easy blade changing Variable speed trigger operates from 0-2800 SPM matches the tool speed to the cutting application 1-1/8-inch stroke length deliver fast cut [...]. |
|
$119.55 |
DeWalt DW7745 is a 14-Inch 90-Tooth Light Gauge Ferrous Metal Cutting Saw Blade. The DW7745 has 12 percent titanium carbide which provides long life in metal cutting. The modified ATB tooth geometry of thie Saw Blade provides clean burr-free cuts. The DW7745 has a a tri-foil braze that absorbs stress making the tip stronger. |
|
$99.99 |
The Tenryu PRF-35566BX 14-inch Heavy-Duty Metal-Cutting Saw Blade for Low RPM Dry Cutters is perfect for cutting angle iron tubing pipe and bar stock. The Tenryu PRF-35566BX is designed to work with all low speed chop saws. |
|
$16.99 |
This pack of three Milwaukee 48-39-0561 44-7/8-Inch 14/18 TPI Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum angle iron bronze brass copper galvanized pipe mild steel and tougher steels including stainless chrome tungsten steel plus other problem material at slow speed. Features: 14/18 TPI Bi-Metal Construction Matrix II high speed steel teeth with 8% cobalt For cutting stock 5/32-Inch to 5/16-Inch thick F [...]. |
|
$16.99 |
This three pack of Milwaukee 48-39-0551 44-7/8-Inch 10/14 TPI Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum angle iron bronze brass copper galvanized pipe mild steel and tougher steels including stainless chrome tungsten steel plus other problem material at slow speed. Features: 10/14 TPI Bi-Metal Construction Matrix II high speed steel teeth with 8% cobalt For cutting stock 3/16-Inch to 1/2-Inch thick Fo [...]. |
|
$199.55 |
The DeWalt DW7749 is a 14-Inch 90T Stainless Steel Cutting Saw Blade. The blade is made from 12% titanium carbide for a long life in metal cutting. Its modified ATB tooth geometry provides clean burr-free cuts and the tri-foil braze absorbs stress making the tip stronger. The DW7749 has expansion slots to dissipate heat which extends blade life. |
|
$11.37 |
Porter-Cable 43815PC 3/16-inch Straight Plastic Cutting Router Bit - 5/8-inch Flute Length 1/4-inch Shank Solid Carbide. |
|
$89.99 |
MK Diamond 157511 MK-415 7 Supreme Tile Wet Cutting Super Hi-Rim Diamond Blade. Continuous super hi-rim diamond blade for wet cutting of porcelain and vitreous ceramic tile. Supreme grade for superior life and faster cutting grinding speeds. Superlative quality performance and value. Manufactured to exact tolerances to ensure precise cutting clean cut edges and long service life. |
|
$74.99 |
Fits Makita LS1013(F) LS1030N LS1040 and most 10 inch Miter sawsThin Kerf design for a lighter cutting load and eliminates wasted material10 inch Carbide-Tipped Saw Blade for smooth and precise cutting in various materialsFully heat hardened to 46RHC to ensure proper stability for professional resultsEach carbide tooth is expertly brazed to ensure long blade life. |
|
$56.60 |
The Milwaukee 48-40-4520 8-Inch 50-Tooth Cermet Tipped Metal Cutting Circular Saw Blade is designed to cut a variety of ferrous materials 3/32-Inch and thicker including pipe angle iron steel studs and conduit. The blade has vibration damping which reduces heat sparks and noise for cleaner smoother burr free cuts. It is used with Milwaukee Dry Cut Saw 6370-20. |
|
$44.55 |
The Milwaukee 48-40-4515 8-Inch 42-Tooth Cermet Tipped Metal Cutting Circular Saw Blade is designed to cut a variety of ferrous materials 3/32-Inch and thicker including pipe angle iron steel studs and conduit. The blade has vibration damping which reduces heat sparks and noise for cleaner smoother burr free cuts. It is used with Milwaukee Dry Cut Saw 6370-20. |
|
$63.60 |
The Milwaukee 48-00-8788 9-Inch 18 TPI Super Sawzall Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. The torch blades will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$20.99 |
The Milwaukee 48-00-5789 12-Inch 18 TPI Super Sawzall Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. These Torch blades will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$13.99 |
The Milwaukee 48-00-5784 6-Inch 18 TPI Super Sawzall Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. These Torch blades will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$49.99 |
Bosch HCFC2087 1/2-inch x 18-inch X5L Carbide SDS-Plus Hammer Drill Bit New sharp cutting edge border for deep penetration into concrete with rebars with each hit Bit length 16-inch useable 18-inch total length 1/2-inch diameter bit. |
|
$69.60 |
The Milwaukee 48-00-8713 9-Inch 10 TPI Super Sawzall Torch Blades are designed for the toughest fire and rescue work demolition plumbing remodeling or general metal cutting applications. The blade will cut pipe conduit angle iron steel and other hard materials. Features: Torch blades are 1-Inch tall for straight fast cutting and 0.042 thick for longer life with the ability to flex in tight cutting situations Milwaukee Sawzall blades have a unique heat treating process that extends the life of the blades. Torch blades are designed to resist breaking further extending blade life. |
|
$49.99 |
Resin-filled laser cut slots to reduce cutting noise and reduce vibrationMarket-leading thin-kerf design to reduce cutting waste and improve sharp-lifeTriple Chip Grind (TCG) - Center of kerf is cut first then flat-top raker removes chips and widens the cut; leads to longer blade life in hard materials. |
